Table of Contents
Advertisement
4.1 Configuring NetWare 2.15 and 3.x
When you are finished, turn the printer off and on again. The printer
creates a status report that indicates the file servers to which the unit is
attached and the queues which it services.
Before you begin:
•
Verify that you have supervisor privileges on the file servers on
which the NIC print server is to be entered.
•
Verify that your version of PCONSOLE is later than 1.0.
4.1.1 Start PCONSOLE and Select File Server
Follow these steps to start PCONSOLE:
1.
Log in to the network, type
2.
Choose
Change Current File Server
menu. This displays a list of file servers.
3.
Select the file server on which you want to install the print server
and press
Enter
played, press
4.
Log in to the file server.
5.
Press
to return to the Available Options menu.
Esc
4.1.2 Create Print Queues
The NIC must be assigned to at least one print queue on the file server.
•
If the print queue that you want the NIC to service already exists,
and you know the name of this queue, go to 4.1.3 Enter the Print
Server Name.
•
If you do not know the name of the queue, or it does not exist, use
the following procedure:
1.
Choose
Print Queue Information
menu, and press
2.
To create a new queue, press
and press
Enter
this time.
3.
Press
to return to the
Esc
4-2
PCONSOLE
. If the name of the file server you want is not dis-
to get a list of file servers.
Insert
. This displays a list of existing queues.
Enter
Insert
. You do not need to enter any more information at
Available Options
and press
Enter
from the
Available Options
from the
Available Options
. Type the name of the queue
menu.
.
Advertisement
Table of Contents
Troubleshooting
