Resetting The Nic To Factory Default - Hitachi Koki DDC 35n User Manual

7.3 Resetting the NIC to Factory Default

You can cause the NIC to restore all parameters to factory default
values, so the NIC appears just as it came from the factory. You may
choose to do this when the NIC is moved to a new location where the
environment (NetWare file servers, IP subnets, and so on) is different.
This process is called "Reset to Factory". It can be done with the
standard Telnet or Web pages (accessed via MAP or a Web Browser)
utility. However, if network access is not possible, the following
method may be used.
Note
• Resetting to factory default means that the print server loses all data
such as names and IP addresses. It does not lose its serial number and
MAC Address.
7.3 Resetting the NIC to Factory Default
7-5