Hitachi Koki DDC 35n User Manual page 103

Network interface card digital document copier

Table of Contents

Edit the hosts file (usually /etc/hosts) or use NIS or DIS to add

the IP address and NIC's node name. See the network adminis-

trator for the IP address. For example, you would type in the

following for NIC named printfast with an IP address of

192.9.200.200:

192.9.200.200 printfast

Stop the BOOTP daemon if it is running.

Edit the /etc/BOOTPtab file and add the following information:

<NIC_host name>:\

:ht = <hardware type>:\

:ha = <MAC Address>:\

:ip = <IP address>:\

:sm = <subnet mask>:\

:gw = <gateway address>:

For example, for an RFC 1048 system:

printfast:\

:ht = ether:\

:ha = 00206BAABBCC:\

:ip = 192.9.200.200:\

:sm = 255.255.255.0:\

:gw = 192.9.200.254:

If running with a more recent BOOTP implementation, such as with

SCO UNIX, add:

:vm = rfc1048:

The same information uses the following format on an RFC 951 sys-

tem:

host

htype

printfast

Start the BOOTP daemon by typing:

#bootpd -s

haddr

00:20:6b:aa:bb:cc 192.9.200.200 defaultboot

6.2 UNIX Printing

iaddr

bootfile

6-13

Table of Contents

Troubleshooting