Hcp 5D - Hertz AMPLIFIER Advanced Web Manual

HCP

HCP 5D

Power Supply
Power supply voltage / fuse:
Idling current (power ON/OFF):
Consumption @ 2Ω, 14.4 VDC
(Max Musical Power):
Remote In:
ART: Automatic Remote Turn-On/Off with Speaker-In
Amplifier Stage
Features:
Distorsion - THD (100 Hz @ 4Ω):
Bandwidth FRONT/REAR:
Bandwidth SUB:
S/N Ratio (A weighted @ 1 V):
Damping factor (100 Hz @ 4Ω) FRONT/REAR:
Damping factor (100 Hz @ 4Ω) SUB:
Pre-In sensitivity:
Speaker-In sensitivity:
Load impedance (MIN) @ 5 Ch:
@ 3 Ch:
Output Power (RMS) @ 14.4 VDC, THD 1%:
5 Ch:
5 Ch:
3 Ch:
3 Ch:
Output Power (RMS) @ 14.4 VDC, THD 10%:
5 Ch:
5 Ch:
3 Ch:
3 Ch:
CEA 2006-A Ratings:
RMS Power (4Ω,≤1 %THD+N, 14.4 V):
50 W x 4 Ch + 150 W + 1 Ch
S/N Ratio (ref. 1 W output):
(150 W Ch) 83 dBA
Inputs / Outputs / Filter
INPUTS:
FRONT Ch. filters FULL:
Hi-Pass:
REAR Ch. filters FULL:
Hi-Pass:
Band-Pass:
SUB Ch. filter LO-PASS:
SUBSONIC (on/off):
BOOST 50 Hz (adjust):
Remote Volume Control (adjust):
Size / Weight
Max size (mm / in.): 345 x 190 x 50 / 13.58" x 7.48" x 1.97"
Weight (kg / lb.):
11÷15 VDC / 2 x 25 A
2 A / 0.04 mA
7 ÷ 15 VDC - 1 mA
10 ÷ 50k Hz
10 ÷ 500 Hz
0.6 ÷ 5 VRMS (15 kΩ)
1.5 ÷ 12 VRMS (47Ω)
4Ω + 4Ω + 2Ω
55 W x 4 + 160 W x 1 (4Ω)
90 W x 4 + 280 W x 1 (2Ω)
180 W x 2 (4Ω) + 160 W x 1 (4Ω)
180 W x 2 (4Ω) + 280 W x 1 (2Ω)
65 W x 4 + 200 W x 1 (4Ω)
105 W x 4 + 330 W x 1 (2Ω)
210 W x 2 (4Ω) + 200 W x 1 (4Ω)
210 W x 2 (4Ω) + 330 W x 1 (2Ω)
(50 W Ch) 83 dBA
PRE IN / SPEAKER IN
50 ÷ 5k Hz @ 12 dB/Oct.
50 ÷ 500 Hz @ 12 dB/Oct.
50 ÷ 500 Hz (hi) @ 12 dB/Oct.
50 ÷ 5kHz (lo) @ 12 dB/Oct.
50 ÷ 500 Hz @ 24 dB/Oct.
25 Hz @ 24 dB/Oct.
(0 ÷ 12) dB
(-50 ÷ 6) dB
2,61 / 5.75
Advanced Web Manual
30 A
0.02 %
100 dB
100
250
2Ω
Yes
Yes
31