If the pre-amplifer is turned on, and transmitter power is applied without an external relay control line, pre-amplifier will be damaged. If you have any questions about the operation of this amplifier, contact Mirage at (601) 323-8287 before attempting to use this amplifier.
6 Meter R.F. Amplifier A-1015-G The Mirage A-1015-G is the next generation of Power Amplifiers for 6 meters. New features make it the most useful and versatile amplifier available. Features include automatic power shut-down circuitry for protection against high antenna VSWR, high temperature and excessive R.F.
6 Meter R.F. Amplifier INSTALLATION The Mirage A-1015-G may be mounted using the brackets (supplied when request is returned via warranty card) or simply place in a convenient operating position. In either case, there must be adequate ventilation for the finned heat-sink. This generally means at least 1 inch clearance from the sink to any surrounding enclosure and an unobstructed flow from the front to the back of the heat-sink.
If the manual does not reference your problem or your problem is not solved by reading the manual you may call MIRAGE at 601-323-8287. You will be best helped if you have your unit, manual and all information on your station handy so you can answer any questions the technicians may ask.
Page 5
A-1015-G Instruction Manual 6 Meter R.F. Amplifier SCHEMATIC...