Hitachi VT-UX615A Owner's Manual page 38

CABLE BOX SETUP
10 Press the two number buttons that match the code number of your cable box brand
from the table below.
For example, press (3)(7) for the Hitachi brand cable box.
11 Press the GUIDE button to enter your cable box brand.
The VCR will change the cable box from channel 02 to channel 09 to confirm that the correct
code was entered.
12 Cable box channel changed to channel 9: Press the (1) button to end this setting.
Click to see remote control illustration.
Your cable box and VCR are now set for VCR Plus+ program recording. Depending on the
manufacturer and model of the cable box, you may also be able to use the VCR remote control
to:
• Change channels on the cable box with the remote's channel Up/Down buttons.
• Use the numbers on the VCR remote to select cable box channels directly.
38