Pre-Tuning The Vcr Tuner; Presetting The Received Channels Without Using A Cable Box (Hookups [A], [B], [C] Or [D]) - Hitachi VT-UX615A Owner's Manual

PRE-TUNING THE VCR TUNER

PRE-TUNING THE VCR TUNER
Note: An antenna or cable must be connected to the VCR before you begin this operation.

Presetting the received channels without using a cable box (Hookups [A], [B], [C] or [D])

1 Press the POWER button to turn on the VCR.
2 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
3 Press the GUIDE button. Click to see remote control illustration.
The main on-screen menu will appear on the TV screen.
4 Press the (4) button to select the CHANNEL PRESET operation.
5 Press the (1) button to select the type of receiving setup you have:
<ANT> Internal or external antenna
<CATV1> Ordinary cable
<CATV2> Alternate cable (If CATV1 doesn't give you the channels you expect).
6 Press the (2) button.
32