Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Sangean Manuals
  4. Radio
  5. WR-2
  6. Instruction manual

Sangean WR-2 Instruction Manual

2 band radio receiver
Hide thumbs Also See for WR-2:

Advertisement

Quick Links

Download this manual See also: Service Manual, Instruction Manual
WR-2 Instruction manual
Important Safety Instructions
1. Read these instructions .
2. Keep these instructions .
3. Heed all warnings .
4. Follow all instructions .
5. Do not use this apparatus near water .
6. Clean only with dry cloth .
7. Do not block any ventilation openings . Install in accordance with the manufacturer s
instruction .
8. Do not install near any heat sources such as radiators , heat registers , stoves, or other
apparatus ( including amplifiers ) that produce heat .
9. Do not defect the safety purpose of the polarized or grounding-type plug . A polarized plug
has two blades with one wider than the other . A grounding type plug has two blades and a
third grounding prong . The wide blade or the third prong are provided for your safety . If
the provided plus does not fit into your outlet , consult an electrician for replacement of the
obsolete outlet .
10. Protect the power cord from being walked on or pinches particularly at plugs ,
convenience receptacles , and the point where they exit from the apparatus .
11. Only use attachments/accessories specified by the manufacturer .
12. Use only with the cart , stand , tripod , bracket , or table specified by the manufacturer , or
sold with the apparatus . When a cart is used , use caution when moving the
cart/apparatus combination to avoid injury from tip-over .
13. Unplug this apparatus during lightning storms or when unused for long period of time .
14. Refer all servicing to qualified service person . Servicing is required when the apparatus
has been damaged in anyway , such as power-supply cord or plug is damaged , liquid has
been spoiled or objects have been fallen into the apparatus , the apparatus has been
exposed to rain or moisture , does not operate normally or has been dropped .
15. To reduce the Risk of Fire or Electric Shock , do not expose this appliance to rain or
moisture .
16. The Shock Hazard Marking and Associated Graphical Symbol is provided on the rear
panel of unit .
17. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids ,
shall not be placed on the apparatus .

Advertisement

loading

Related Manuals for Sangean WR-2

Summary of Contents for Sangean WR-2

  • Page 1 WR-2 Instruction manual Important Safety Instructions 1. Read these instructions . 2. Keep these instructions . 3. Heed all warnings . 4. Follow all instructions . 5. Do not use this apparatus near water . 6. Clean only with dry cloth .
  • Page 2 Controls 1. Light button 2. Radio band/AUX IN selection 3. Memory presets 4. Power On/Off/Sleep button 5. Rotary Tuning Control 6. Volume/Tone control 7. IR sensor 8. Traffic information button and minute adjustment 9. Auto time button and hour adjustment 10.
  • Page 3 15. External F-type FM antenna terminal 16. External AM antenna terminal ( USA version only ) 17. AC power cord socket 18. 12V DC input socket ( ideal for vehicles/boats ) 19. REC out socket 20. Aux in socket 21. External/Internal antenna switch...
  • Page 4 22. Reset button Display A. Frequency/Time/Station display B. Radio/Buzzer alarm symbol C. Daylight Saving Time ( DST ) , not applicable for WR-2 D. Sleep/Snooze status E. RDS indicator F. Time indicator G. Stereo indicator H. Traffic indicator Aux In level attenuation...
  • Page 5 Remote Control 1. Power on/off/Sleep button 2. Tuning control 3. Volume control 4. Tone control 5. Memory presets 6. Mute 7. Traffic button and minute adjustment 8. Auto time button and hour adjustment 9. Alternative Frequency and Select button 10. Set button 11.
  • Page 6 AC operation Before you plug the AC cord into the radio , be sure the AC voltage is correct . Insert the plug on the end of the supplied power cord into the AC power socket on the back of the radio . DC operation For outdoors use , you can power the radio by using 12V DC input socket from a DC power supply ( example , from the power supply of vehicles or boats ) .
  • Page 7 Alarm can be operated when radio is on or off . Setting via remote control is the same . Wake to buzzer alarm A beep tone will sound when using the buzzer alarm . The alarm beep will increase in volume every 15 seconds for one minute followed by one minute silence before repeating the cycle .
  • Page 8 will flash 5. Press Band button and rotary tuning knob to select required radio station . You can also select alarm station by recalling the preset stations pressing memory presets button . 6. Press and release Set button to complete radio alarm set . Display will show radio alarm icon 7.
  • Page 9 through the available sleep times in the order 60-45-30-15-120-90-60 . Release the button when the required sleep time appears in the display and the radio will play the last station selected . 2. To cancel the sleep function , press On/Off button , the symbol will disappear .
  • Page 10 Scan tuning via remote control device 1. Switch on your radio by pressing the power button . 2. Select the required waveband . 3. Press and hold down either the tuning up or down button until the frequency in the display begins to change rapidly .
  • Page 11 level ( maximum to 60 ) 2. Press Volume control once to get into Treble control . Rotary the control until required treble is reached . 3. Press Volume control twice to get into Bass control . Rotary the control until required bass is reached .
  • Page 12 1. Ensure that your radio is switched off . Press and hold down the M3 button until current clock format begins to appear in the display . Hold down the M3 button for another 8 seconds until clock format begins to flash in the display . 2.
  • Page 13 Operating your radio using RDS ( Radio Data System ) 1. Switch on your radio and select the FM waveband . 2. Tune into a station , the display will indicate frequency for a few seconds and then change to show the station name . The RDS symbol will appear in the display .
  • Page 14 Display button Whilst tuned to a station , you can change between station name/frequency , normal time and alarm time ( if set ) by repeatedly pressing of the Display button . AUX IN socket On the rear of your radio is to allow signal from external device e.g. CD player to be fed into your radio and playback of the external device via your radio amplifier .
  • Page 15 1. Switch off the radio . 2. With the aid of a suitable implement ( the end of a paper clip ) , press the RESET button located on the underside of your radio for at least 2 seconds , this will reset the microprocessor , clock time and clear all stations stored in the preset memory .