Sangean WR-2 Instruction Manual page 12

1. Ensure that your radio is switched off . Press and hold down the M3 button until current
clock format begins to appear in the display . Hold down the M3 button for another 8
seconds until clock format begins to flash in the display .
2. Rotary the tuning control to adjust required clock format ( rotary up to get 24 hours format
and rotary down to get 12 hours format ) .
3. Press the M4 button again to complete setting . Display will return to clock status after
setting .
Note : remote control is not applicable for this operation .
Radio Data System ( RDS )
The Radio Data System ( RDS ) is a system in which inaudible digital information is
transmitted in addition to the normal FM radio program . RDS offers several useful features ,
the followings are available on your radio .
Program Service (PS) name
The Program Service name is a text usually consisting of not more than eight alphanumeric
characters . It indicates information about the program being broadcast . A station name or an
abbreviation is shown in the display instead of the tuned frequency ( Example : BBC R4 ) .
Enhanced Other Network (EON)
Additional information about other programs within the same network is transmitted when your
broadcasting station is using an Enhanced Other Network . You will hear traffic flashes of other
programs within the network automatically if the Traffic Announcement function is switched
on .
Traffic Information System
The Traffic Program identification (TP) indicates which RDS stations provide Traffic
information . The Traffic Announcement identification (TA) indicates Traffic information is being
broadcast . When TA is received , the
Clock Time (CT) automatic adjustment
The Clock Time information transmitted from the broadcasting station can be used for setting
and synchronizing the clock of your radio automatically . The Auto-Time function can be
enabled or disabled by the user .
Alternative Frequencies (AF)
This feature provides a list of Alternative Frequencies for the station being received . You can
switch to those frequencies directly if desired .
symbol will flash in the display .