Vcr Plus+ Setup - Channel Setup; Using The Vcr Plus+ System To Record A Program - Hitachi VT-UX617A Owner's Manual

4 Press the (4) button to select VCR PLUS+ SETUP.
A small arrow points to a blank "--" in the CHANNEL column.
Note: If your broadcast channel number is the same as the VCR Plus+ Channel in your TV listing do not enter
any number.
5 Press the CH ( /
6 Press the number buttons to assign your broadcast channel number to the corresponding VCR Plus+
channel.
In this example broadcast channel 38 is assigned to VCR Plus+ channel 42.
Note: If you enter a wrong digit, press the CLEAR button to erase the wrong number and enter the correct one.

VCR Plus+ setup - Channel setup

7 Repeat steps 5 - 6 for all channels that need to be assigned.
8 Press the GUIDE button twice to end the setup procedure.
You are ready to begin delayed recording with the VCR pluls+ system.

Using the VCR Plus+ system to record a program

1 Insert a blank or erasable tape.
The power comes on automatically and the tape indicator lights on the display.
) button to move up and down through the channel list until you reach VCR Plus+ CH42.