ritetemp 8029B Operation Manual

Operation 8029B
TEMP
UP button
TEMP
DOWN button
1
PG

1 Configure

Set HEAT/COOL mode switch to HEAT or COOL. The unit will display the ambient
temperature. Set the Fan switch to automatic.

2 Set Temp

Press the TEMP UP and TEMP DOWN buttons to select the desired temperature.
The SET icon will be displayed with your desired temperature. ( The display will return to
the current temperature in 5 sec if no button is pressed).

3 Operate

Your thermostat is now in operation.
In the winter, set the system switch to HEAT to control your heating system.
In the summer, set the system switch to COOL to control your air conditioner.
In spring and fall or when windows are open, you can set the system switch OFF.
Setting the FAN switch to AUTO automatically runs your system's fan during heating and
cooling.
Setting the FAN switch to ON runs your system's fan continuously even without heating
or cooling.
2
PG
Temperature
Display
Switch
HEAT/COOL
Mode Switch
RESET
button
Farenheit/Celcius
indicator
ROOM TEMP
Current Temperature
Display
Fan
Statement of use: The 8029B can be used with most 24
volt gas, oil or electric heating and air conditioning systems,
single-stage heat pumps or gas millivolt heating systems. It
cannot be used with 120 volt heating systems or
multistage heat pumps.
TARGET TEMP
SET Temperature
Display