Table of Contents
Advertisement
Quick Links
Operation 8050C
4 Special Features cont.
Heat Pump EMER button
NOTE: If you have a HEAT PUMP with auxiliary heat and you
have enabled the Heat Pump features of your thermostat, this
section applies to your system.
If your Heat Pump malfunctions or cannot maintain your desired
temperature you may occasionally need to access the EMER button
on the key pad. This tunrs on your auxiliary heat source and will
continue until you turn it off.
• To turn on the EMER (auxillary heat) press the EMER button. The
EMER ON icon will flash.
• To turn off EMER (auxillary heat) press the EMER button again.
12
PG
Customer Support: 888-515-2585
Visit our website www.ritetemp-thermostats.com
or
1-405-062
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ritetemp 8050C
Summary of Contents for ritetemp 8050C
- Page 1 • To turn on the EMER (auxillary heat) press the EMER button. The EMER ON icon will flash. • To turn off EMER (auxillary heat) press the EMER button again. Customer Support: 888-515-2585 Visit our website www.ritetemp-thermostats.com 1-405-062...
-
Page 2: Product Overview
Operation 8050C AA Battery Time / Current Temp TEMP UP Control Panel Compartment Display button - Cover Closed - Reset button Switch Heat/Cool Mode Switch Switch Set Temp Display Mode Backlight TEMP DOWN Switch Switch button Statement of use: The GPMG8050C can be used with most... -
Page 3: Auto-Run
2 Auto-run This Thermostat comes preprogrammed with an Energy-Star approved program. This program is recommended by the EPA for energy efficiency. We strongly recommend that you Auto-Run this program for one week, and see if it works for you. If it does not fit your needs you can always input a custom program. - Page 4 3 Program cont. Select the time of day you want that TIME SLOT to represent: TIME TIME To set the time when P1 will begin, press the buttons to <TIME TIME> move the set point forward or backward in time. Select the next TIME SLOT and program temp and time: Press NEXT...
-
Page 5: Special Features
4 Special Features The "Special Day Program" can be used when you are unexpectedly home or going onvacation and need to activate an alternate heat / cooling program. With the MODE switch in HEAT or COOL press the SPECIAL DAY button. When the SPECIAL DAY Program is active, all other day settings are ignored The SPECIAL DAY program will terminate when the mode switch is moved or if the SPECIAL DAY button is pushed again. - Page 6 The life of a heater filter varies depending on many factors, furnace run time, and this will vary from the filter life noted on the filter media. The 8050C has a feature that keeps track of actual furnace run time and reminds you to periodically replace your system's air filter.
- Page 7 4 Special Features cont. Status Indications COOL will blink when the COOL is running. HEAT will blink when the HEAT is running. HEAT 2 will blink when 2nd stage is running. (if available in heating system) (normal) HEAT PUMP will blink when the heat pump is running. (pump) HEAT 2 PUMP will blink when the heat pump and auxiliary heat are running.
Need help?
Do you have a question about the 8050C and is the answer not in the manual?
Questions and answers