Skipping Unwanted Scenes During Recording - Hitachi VT-MX431A Owner's Manual

SKIPPING UNWANTED SCENES DURING RECORDING

SKIPPING UNWANTED SCENES DURING RECORDING

Press the PAUSE button on the remote control to temporarily stop recording.
Press the PAUSE or REC button to resume recording.
NOTE: When the VCR is in the Pause mode, you may view the time remaining with marks
on the TV screen. Each mark represents one minute. After five minutes, the VCR will
automatically switch to the Stop mode to prevent tape damage. When there is 1 minute
remaining, one will flash.
52