Skipping Some Materials During Recording; Edit Search - Hitachi VT-MX411AC Owner's Manual

RECORDING
4 Stop recording
Press STOP button when recording is completed.

SKIPPING SOME MATERIALS DURING RECORDING

Press PAUSE button to temporarily stop recording.
Press PAUSE or REC button to resume recording.
NOTE: To prevent tape damage, after five minutes, the VCR will automatically switch to the Stop
mode. You may review the time remaining with "n n n n " marks on the TV screen. Each "n n n n " mark shows
one minute.

EDIT SEARCH

To edit an unwanted segment from the already recorded portion of tape while VCR remains in
record mode.
1) Press PAUSE button.
2) Press and hold REW button until you have reached the beginning of the unwanted segment.
(If you rewind past the beginning of the unwanted segment, press and hold F.FWD button until
you have reached it.)
NOTE: If you do not press PAUSE button again within five minutes, VCR will automatically switch
to the Stop mode.
3) Press PAUSE or REC button to resume recording.
41