Channel Set Up Again - Hitachi VT-MX431A Owner's Manual

CHANNEL SET UP AGAIN

CHANNEL SET UP AGAIN

Remember: If your cable box or satellite box is connected as in Fig 4 on page 11 or Fig 5 on
page 12, you DO NOT have to set up the channels. Just select the TV and VCR to channel 3
or 4 and also have the CH3/CH4 switch on the back of the VCR to match the channel you
selected (CH 3 or CH 4). Now select the Box to the channel you wish to view or record.
• Use the remote control for this procedure.
1 ) Press the MENU button until the INITIALIZE menu appears.
2) Confirm "CHANNEL SET UP" is pointed to, then press the F.FWD/ button.
3) Confirm "AUTO TUNING" is pointed to, then press the F.FWD/ button. After scanning, the
tuner stops at the lowest memorized channel.
• The VCR distinguishes between standard TV channels and cable channels.
34