Recording; Viewing And Recording The Same Program; Skipping Some Materials During Recording - Hitachi VT-FX600A, VT-FX600C Owner's Manual

Hitachi video deck vt-fx600a, vt-fx600c owner's manual

Table of Contents

RECORDING

Make sure...

• VCR power must be turned on.

• Turn on the TV and set the TV channel to the same video output channel as located on the back of the VCR.

(CH 3 or 4)

• Press VCR/TV button on the remote control so that "VCR" appears on the display.

• Insert a cassette with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point

at which you want to begin recording.)

1 Select the channel to be recorded

Press number buttons on the remote control or the CHANNEL (or CH)

NOTE: When you record with a cable converter box, the VCR channel must be selected to 3 or 4 then the actual

channel that you wish to record must be selected on the cable converter box.

2 Select the tape speed

Press TAPE SPEED button on the remote control to select the desired tape speed (SP/LP/SLP).

3 Begin recording

Press REC button. The red "

4 Stop recording

Press STOP button when recording is completed.

Press PAUSE button to temporarily stop recording.

Press PAUSE or REC button to resume recording.

" appears on the display

button.

- 30 -

Table of Contents

Vt-fx600c