Connecting Your Monitor : Prolite T1634Mc-B1 - Iiyama ProLite T1634MC User Manual

CONNECTING YOUR MONITOR : ProLite T1634MC-B1

Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the USB Cable.
Connect the monitor cable to the Remote Control OSD key (option), if necessary.
Connect the AC Adapter to the monitor and the Power Cable to the AC Adapter fi rst and then
connect to the power supply.
Turn on your monitor and computer.
 The signal cables used for connecting the computer and monitor may vary with the
NOTE
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
 For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
 Make sure you tighten the fi nger screws at each end of the Signal Cable.
[Example of Connection]
Remote Control
OSD Key
(option)
Power Cable
(Accessory)
[Collect Cables]
Put the cables through the cable holes.
Collect cables at the back of the stand.
8 BEFORE YOU OPERATE THE MONITOR
<Back>
D-Sub Signal Cable (Accessory)
AC Adapter
(Accessory)
USB Cable (Accessory)
AC adapter
fastening
Computer
Cable Hole