Connecting Your Monitor : Prolite Xb2472Hd - Iiyama ProLite X2472HD-1 User Manual

CONNECTING YOUR MONITOR : ProLite XB2472HD

Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the AC Adapter to the monitor and the Power Cable to the AC Adapter first and then
connect to the power supply.
Turn on your monitor and computer.
 The signal cables used for connecting the computer and monitor may vary with the type of
NOTE
computer used. An incorrect connection may cause serious damage to both the monitor and
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector.
If a special cable is required please contact your local iiyama dealer or regional iiyama
offi ce.
 For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
 Make sure you tighten the fi nger screws at each end of the signal cable.
[Example of Connection]
AV Equipment
[ Collect Cables ]
Put the cables through the cable holder.
Collect cables at the back of the stand.
8 BEFORE YOU OPERATE THE MONITOR
<Back>
HDMI Cable
(Not Included)
Power Cable
(Accessory)
AC Adapter
(Accessory)
D-Sub Signal Cable
(Accessory)
DVI-D Cable (Accessory)
Computer