Adjusting The Focus - Canon LEGRIA HF R46 Instruction Manual

- In [ mode, when using the [
SCN
[ Beach], [

Adjusting the Focus

Autofocus may not work well on the following subjects. In such case,
focus manually.
• Reflective surfaces
• Subjects with low contrast
or without vertical lines
Operating modes:
POINTS TO CHECK
• Adjust the zoom before you start the procedure.
1 Open the manual focus screen.
>
2 Touch a subject that appears inside the < frame.
• The Touch AF mark (I) will flash and the focusing distance will be
adjusted automatically. You have the option to further adjust the
focus manually as necessary.
• You can touch [D] instead to adjust the focus manually without
activating the Touch AF function.
• The manual focus controls appear.
• Touch [D] again to return the camcorder to autofocus.
3 Touch and hold [F] or [E] to adjust the focus.
• The focusing distance displayed will change as you adjust the focus.
The focusing distance will be displayed for about 2 seconds. You can
change the units used for the distance display with the
>
[Displayed Units] setting.
Sunset] or [
SCN
[< Focus]
Night Scene], [
Spotlight] Special Scene mode.
• Fast moving subjects
• Through wet windows
• Night scenes
Advanced Shooting
Snow],
> q
79