List Of Messages For Connecting To An External Hard Drive - Canon LEGRIA HF R46 Instruction Manual

Some scenes could not be deleted
- Movies that were protected/edited with other devices and then transferred to a memory card
connected to the computer, cannot be deleted with this camcorder.
Some scenes were recorded using another device and cannot be copied.
- Scenes that were not recorded with this camcorder cannot be copied to the memory card.
Task in progress. Do not disconnect the power source.
- The camcorder is updating the memory. Wait until the operation ends and do not disconnect
the compact power adapter or remove the battery pack.
This photo cannot be displayed
- You may not be able to display photos taken with other devices or image files created or
edited on a computer and then transferred to a memory card connected to the computer.
To record video on this memory card, it is recommended to use [Long Play] video quality.
- When using a memory card rated SD Speed Class 2, you may not be able to record movies if
you use a video quality option other than LP or 4 Mbps..
To record video on this memory card, it is recommended to use a video quality setting other
than [50P Recording].
- When using a memory card rated SD Speed Class 2 or 4, you may not be able to record mov-
ies if you use a video quality option other than 50P or 35 Mbps.
Too many photos and MP4 movies. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos
and MP4 movies on the memory card to fewer than 2,500 (Windows), or 1,000 (Mac OS).
- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and
restore the connection after a short while.
Unable to recognize the data
- You transferred data to the camcorder recorded using a video configuration that is not sup-
ported (NTSC). Play back the recordings with the device originally used to record them.
Unable to recover data
- Could not recover a corrupted file. Save your recordings (A 108) and initialize the memory
using the [Complete Initialization] option (A 31).

:/9/8 List of Messages for Connecting to an External Hard Drive

Error writing to external hard drive
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing to the external hard drive. Select
[Recover] to try to recover the recordings.
Quickly erases all files and deletes partitions from the external hard drive. Initialize?
- If you initialize the hard drive, all data it contains will be lost, including any partitioned drives.
If necessary, back up data and then initialize the hard drive with the camcorder.
166
Additional Information