Canon LEGRIA HF R46 Instruction Manual page 32

Do not disconnect the power source or turn off the camcorder until the
initialization is completed.
2 Initialize the memory.
:/9/8
>
[
[& Built-in Mem.] or [
[Complete Initialization]
;
>
[
[Initialize]
[X]
1
Touch this option if you want to physically erase all the data rather than just clear
the file allocation table of the memory.
2
If you selected the [Complete Initialization] option, you can touch [Cancel] to cancel
the initialization while it is in progress. All recordings will be erased and the memory
can be used without any problem.
IMPORTANT
• Initializing the memory will permanently erase all recordings. Lost origi-
nal recordings cannot be recovered. Make sure you save important
recordings in advance using an external device (A 104).
• Initializing a memory card will permanently erase any music files and
images you may have transferred to the card. (:/9/8 The
music files and image mix frames that come pre-installed in the built-in
memory will be restored after it is initialized.) To transfer music files from
the supplied LEGRIA CD-ROM to the memory card connected to a
computer:
- Windows users: Remove the memory card from the camcorder,
connect it to a computer and use the supplied software for AVCHD
movies, Transfer Utility LE. For details, refer to the Software Guide
(PDF file) of PIXELA's software.
- Mac OS users: Remove the memory card from the camcorder and
connect it to a computer. Use Finder to transfer music files from the
32
Preparations
Other Settings]
1
Other Settings]
>
[Complete Initialization]
> q >
>
Mem. Card]
2
> >
[Yes] [OK]
> q >
1
>
[Initialize &/
>
[Initialize]
>
[X]
[Initialize ]
2
>
[Yes] [OK]
>
]
>
>