Face Detection And Tracking - Canon LEGRIA HF R46 Instruction Manual

Face Detection and Tracking

The camcorder automatically detects people's faces and uses this
information to select the optimal settings for beautiful videos and pho-
tos. You can use tracking to tell the camcorder to track and optimize
settings for a different person. You can also use tracking to always
keep in focus other moving subjects, such as pets or moving vehicles.
Operating modes:
*
*
* Face detection and tracking are always activated in
POINTS TO CHECK
• Select a shooting mode other than the [
or [ Fireworks] Special Scene mode in
By default, face detection and tracking are activated so you can skip step
1 in the following procedure. If the function was turned off, perform the fol-
lowing procedure starting from step 1.
1 Activate face detection and tracking.
>
[Face Detection & Tracking]
2 Point the camcorder at a person.
If there is more than one person in the picture, the camcorder will
automatically select one person it determines is the main subject. The
main subject is indicated by a white face detection frame and the
camcorder will optimize the settings for that person. Other faces will
have gray frames.
3 Touch a different face on the touch
screen to optimize the camcorder's
settings for that person.
• You can also touch other moving
objects, such as a pet.
SCN
[ Other Settings]
Night Scene], [
mode.
SCN
> p >
[i On }]
>
Main subject
Advanced Shooting
and modes.
Low Light]
>
[X]
75