Step 2: Charging The Battery Pack - Sony DCR-SD1000E Operating Manual

Step 2: Charging the battery pack

Battery pack
To the wall outlet
(wall socket)
Power cord
(Mains lead)
You can charge the "InfoLITHIUM" battery pack (L series) after attaching it to your
camcorder.

Notes
You cannot attach any "InfoLITHIUM" battery pack other than the L series to your camcorder.

1
Slide the POWER switch to OFF (CHG) (the default setting).
2
Attach the battery pack to your camcorder.
Attach the battery pack by sliding it in the direction of the arrow while pressing it until
it clicks.
3
Connect the AC Adaptor to the DC IN jack of your camcorder. Be sure that
the  mark on the DC plug is facing to the  mark on your camcorder.
4
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.
DC plug
AC Adaptor
POWER switch
CHG (charge) lamp
Align the  mark on the DC
DC IN jack
plug with that on the DC
IN jack.
GB
13