Sony DCR-SD1000E Operating Manual page 84

The image in the viewfinder is not clear.
Move the viewfinder lens adjustment lever

until the image appears clearly (p. 18).
The LCD screen is not turned on.
Slide the LCD/EVF-EVF switch to LCD/EVF

(p. 19).
Dots in lines appear on the LCD screen.
This is not a malfunction. These dots are not

recorded.
Memory card
Operations using the memory card
cannot be performed.
If you use the memory card formatted on a

computer, format it again on your camcorder
(p. 78).
Images stored on the memory card
cannot be deleted.
The maximum number of images that you can

delete on the index screen at one time is 100.
You cannot delete the protected images.

The data file name is not indicated
correctly or flashes.
The file is damaged.

The file format is not supported by your

camcorder (p. 95).
Recording
Refer also to "Memory card" (p. 84).
Pressing START/STOP or PHOTO does not
record images.
The playback screen is displayed. Press MODE

to turn on the
(p. 23).
Your camcorder is recording the image you

GB
84
(Movie) or (Photo) lamp
have just shot on the recording media. You
cannot make new recording during this
period.
The recording media is full. Delete

unnecessary images (p. 40).
Total number of movie scenes or photos

exceeds the recordable capacity of your
camcorder (p. 91, 92). Delete unnecessary
images (p. 40).
The temperature of your camcorder is

extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is

extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
Photos cannot be recorded.
You cannot record photos together with

[SMTH SLW REC].
The access lamp remains lit or flashing
even if recording was stopped.
Your camcorder is recording the scene you

have just shot on the memory card.
The imaging field looks different.
The imaging field may look different

depending on the condition of your
camcorder. This is not a malfunction.
The actual recording time for movies is
less than the expected recording time of
the recording media.
Depending on the recording conditions, the

time available for recording may be shorter, for
example when recording a fast moving object,
etc. (p. 91).
The camcorder stops operating.
The temperature of your camcorder is

extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
