Ap Mode - Edimax EW-7416APn User Manual

2-4-1 AP Mode

This is the most common mode. When in AP mode, this access point acts
as a bridge between 802.11b/g/Draft-N wireless devices and wired
Ethernet network, and exchange data between them.
When you select 'AP', the following options will be displayed:
Here are descriptions of every setup item:
Band
Main ESSID
Multiple ESSID
Please select the wireless band you wish to use. By
selecting different band setting, you'll be able to
allow or deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz
(G), only wireless clients using the wireless band
you select (802.11b, 802.11 Draft-N, or 802.11g)
will be able to connect to this access point.
If you select 2.4GHz (B+G), then only wireless
clients using 802.11b and 802.11g band will be
able to connect to this access point.
If you want to allow 802.11b, 802.11g, and 802.11
Draft-N clients to connect to this access point,
select 2.4GHz (B+G+N).
Please input the ESSID (the name used to identify
this wireless access point) here. You can input up
to 32 alphanumerical characters. PLEASE NOTE
THAT ESSID IS CASE SENSITIVE.
The access point supports multiple SSID function;
23