Socket Bluetooth GPS Nav Kit Quick Start Manual page 8

By States
If you have a storage card with at least 64 MB of storage space available,
use the By States or By Region screen. If you are using the U.K. version of
MyNavigator, please substitute "region" for "state" in the instructions.
1. Select the state(s) or, if applicable, the section(s) of a state appropriate
for your trip. You can either click directly on the map, or you can scroll
and use the check boxes on the right. If selecting multiple states, select
states that are adjacent to each other. If you select states that are not
adjacent, the software will also load maps for all the states in between.
2. The total file size for the maps you selected will appear in the
Selected Size field at the bottom of the screen.
3. In the Location drop-down menu at the bottom of the screen, select
Pocket PC Storage Card.
4. A Storage Card Selection screen will appear. Use the drop down menu to
select the storage card you want to use. Click OK.
5. The amount of memory available on your storage card will appear in the
Available Space field at the bottom of the screen. Make sure your card
has enough available space for the selected maps. Click Generate Map.
6. The Generating Map screen will appear on the host PC. Map files will
begin to transfer to your Pocket PC. Depending on the size of the files
and the speed of your connection, the transfer may take several minutes.
7. When map installation is complete, click OK.
8. When software installation is complete, disconnect the mobile computer
from the host PC. Soft reset the Pocket PC by pressing the reset button.
8