Step 2: Install The Software - Socket Bluetooth GPS Nav Kit Quick Start Manual

STEP 2: Install the Software

Follow these instructions to install the Socket MyNavigator software:
1. Make an active connection between the mobile computer and a host PC
(e.g., via ActiveSync).
An active connection exists if data can move between the mobile
computer and host PC via a serial/Ethernet/USB cable or cradle.
2. Insert the Socket MyNavigator Installation CD into your host PC. If
you are using the U.S. version of the Nav Kit, insert Disk 1.
3. Use My Computer or Windows Explorer to access the CD-ROM drive.
In the CD, click on SETUP.EXE.
4. Follow the instructions on your screen to install the software.
5. Now you are ready to load maps onto your Pocket PC. Do not
disconnect your Pocket PC from your host PC.
6
Note: The
host PC can
be a desktop
or notebook
PC.