Step 4: Connect The Receiver And Pocket Pc Via Bluetooth - Socket Bluetooth GPS Nav Kit Quick Start Manual

STEP 4: Connect the Receiver and Pocket PC via
Bluetooth
1. Turn on the Bluetooth GPS Receiver via the power switch.
2. The Bluetooth Status LED will blink blue to show that the
Bluetooth radio is on.
Note: For best results, you should also obtain a GPS fix now. The GPS
status LED will blink green when a GPS fix is achieved.
3. Perform a Bluetooth device discovery on your Pocket PC to find the
Bluetooth GPS Receiver. Refer to the user documentation for your
Bluetooth device for instructions.
4. Pair and bond with the Bluetooth GPS Receiver. While bonding, when
your device requests a passkey, enter
documentation for your Bluetooth device for instructions.
Note:
• If you are using a Socket Bluetooth Card, you must set the Bluetooth
GPS Receiver as your Favorite COM Port. From the Bluetooth
Devices folder, tap Tools | My Favorites | COM Port and select the
BTGPS as your favorite COM port device.
• You only need to discover, bond with, and pair with the Bluetooth
GPS Receiver the first time you use it with MyNavigator.
5. Start the MyNavigator program on your Pocket PC.
Tap Start | Programs | My Navigator.
6. A warning screen will appear. Read the warning, then tap OK.
0183
. Refer to the user
11