Socket Bluetooth GPS Nav Kit Quick Start Manual page 12

7. The Bluetooth connection for MyNavigator must be set to the correct
COM port. Depending on the device you are using for Bluetooth
connectivity, you may or may not need to modify the COM port setting.
Note: The baud rate must be set to 4800 to work with the Bluetooth GPS
Receiver. This is the default baud rate and needs no modification.
No modifications needed
You do NOT need to modify the COM port setting if you are using one
of the following devices for Bluetooth connectivity:
• Socket Bluetooth Card: If you are using the Socket Bluetooth Card
and already set the Bluetooth GPS Receiver as your favorite Serial
COM Port, then MyNavigator will automatically detect and use the
appropriate COM port.
• iPAQ 3870 series, 3970 series, 5450 series: The MyNavigator
default is COM8, which is compatible with these iPAQ Pocket PCs.
Modifications needed to access the correct COM port
If you are not using one of the Bluetooth devices listed above, then you
must modify the COM port setting in MyNavigator to work with your
Bluetooth device. To modify the COM port setting:
a) Determine which COM port number your Bluetooth device uses for
serial COM port connections. If necessary, refer to the user
documentation for your Bluetooth device.
b) At the bottom of the screen, tap Tools | GPS Options | COM Port.
c) Select the correct COM port for your Bluetooth device.
12