Accessories; Troubleshooting - Ryobi YG100P Operator's Manual

To order parts and maintenance kits, call 1-800-525-2579.
Driver Maintenance Kit ....................................................................................................................................089041007909
Overhaul Kit .....................................................................................................................................................089041007910
Oil and Wrench Kit...........................................................................................................................................089041007911
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use any attachments or ac-
cessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended
can result in serious personal injury.
PROBLEM
Air leak near the top of the tool or in
the trigger area
Air leak near the bottom of the tool
Tool does nothing or operates slug-
gishly
Tool jams frequently
NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 12 AFTER
FRENCH AND SPANISH LANGUAGE SECTIONS.

ACCESSORIES

TROUBLESHOOTING

POSSIBLE CAUSE
Loose screws
Worn or damaged O-rings or seals
Worn or damaged O-rings or bumper
Inadequate air supply
Inadequate lubrication
Worn or damaged O-rings or bumper
Incorrect fasteners
Damaged fasteners
Loose magazine
Dirty magazine
Worn or damaged driver
This product has a Three-year Limited Warranty.
For Warranty details go to www.ryobitools.com
11 — English
SOLUTION
Tighten screws
Install Overhaul Kit
Install Overhaul Kit
Verify adequate air supply
Lubricate tool
Install Overhaul Kit
Verify that fasteners are the correct type
and length
Replace fasteners
Tighten screws
Clean magazine
Install Driver Maintenance Kit