Maintenance; Accessories - Ryobi PCL424 Operator's Manual

18 volt compact router
Table of Contents

Advertisement

Available languages

Available languages

ATTACHING THE ROUND SUBBASE (NOT
INCLUDED)
See Figure 17, page 14.
Remove the battery pack.
Turn the router upside down to remove the four subbase
screws and the D-shaped subbase.
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts could create a hazard or cause
product damage.
Look for these accessories at the service center:
 Round Sub-base .............................................................................................................................................519233001
 Edge Guide Assembly ......................................................................................................................................204358001
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use any attachments or
accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recom-
mended can result in serious personal injury.
NOTE: ILLUSTRATIONS START ON PAGE 12 AFTER
FRENCH AND SPANISH LANGUAGE SECTIONS.
OPERATION
Attach the round subbase using the same screws.
Tighten the screws securely. Do not over tighten.
WARNING:
Always use a subbase recommended for use with this
product when trimming. Use of the router without a
subbase or using the incorrect subbase can result in
serious personal injury.

MAINTENANCE

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.

ACCESSORIES

11 — English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents