Maintenance; Accessories; Troubleshooting; Illustrations - Ryobi PCL430 Operator's Manual

WARNING:

When servicing, use only identical replacement parts.
Use of any other part could create a hazard or cause
product damage.
Look for these accessories where you purchased this product or call 1-800-525-2579:
 Segment Saw Blade ..........................................................................................................................................681457016
 General Purpose Plunge Cut Blade ...................................................................................................................681458028
 Detail Sanding Backing Pad ..............................................................................................................................303590006
 Sanding Sheets .......................................................902460001 (80 Grit), 902423001 (60 Grit), and 902424001 (120 Grit)
WARNING:
Current attachments and accessories available for use with this product are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not
recommended can result in serious personal injury.
LED LIGHT FUNCTIONS
TOOL STATUS
Normal
Low Battery
Excessive Force
Over Temperature
*More than 9 flashes will result in the need to remove the battery and reinsert a few minutes later.
ILLUSTRATIONS START ON PAGE 10 AFTER
FRENCH AND SPANISH LANGUAGE SECTIONS.

MAINTENANCE

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.

ACCESSORIES

TROUBLESHOOTING

LED LIGHT SCENARIO
Solid Light (No Flashes)
3 Flashes
6 Flashes
9 Flashes
9 — English
ACTION REQUIRED
No Action Needed
Replace Battery
Wait 5 Seconds
Let Tool Cool Off