Appendix A. CRU instructions
Replacing the optical drive
To replace the optical drive, do the following:
1 Turn off the computer; then disconnect the AC power adapter and all
cables from the computer.
2 Close the computer display, and then turn the computer over.
3 Remove the battery pack. For details, see "Replacing the battery pack" on
page 28.
4 Remove the screws
5 Remove the screw shown in the illustration
40
, and then remove the bottom slot cover
a
2
3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1
1
.
c
.
b