Chapter 2. Learning The Basics; Configuring The Operating System For The First Time; Putting The Computer To Sleep Or Shutting It Down - Lenovo B5400 Touch User Manual

Chapter 2. Learning the basics

Configuring the operating system for the first time

You need to configure the operating system when it is first used. The
configuration process may include the procedures below:
• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the operating system
• Creating a user account

Putting the computer to sleep or shutting it down

When you have finished working with your computer, you can put it to sleep
or shut it down.
 Putting your computer to sleep
If you will be away from your computer for only a short time, put the
computer to sleep. When the computer is in sleep mode, you can quickly
wake it to resume use, bypassing the startup process.
To put the computer to sleep:
• For the Windows 7 operating system:
- Click Start. Then select Sleep from the Shut down menu options.
- Press Fn+F1.
• For the Windows 8 operating system:
- Move your cursor to the lower-right corner of the screen to open the
charms bar, then select Settings
- Press Fn+F1.
Attention:
•
Wait until the power and battery status indicator light starts blinking green
(indicating that the computer is in sleep mode) before you move your computer.
Moving your computer while the hard disk drive is spinning can damage the hard
disk, causing loss of data.
To wake the computer, do one of the following:
• Press the power button.
• Press the Fn key on the keyboard.
Power Sleep.
- - - - - - - - - -
- - - - - - - - - - - - -
13