Appendix A. CRU instructions
Replacing the optical drive
To replace the optical drive, do the following:
Notes:
• Make sure the computer is turned off and all the cables disconnected from the computer
before you replace the optical drive.
• Make sure the computer display is closed to avoid being damaged.
1 Remove the screw shown in the illustration a. Gently pull the optical
drive out from its cavity b.
2 Insert a new optical drive and tighten the screw to secure the drive.
30
1
2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -