Hitachi CP-X940W/E Operating Manual page 6

Hitachi operating guide liquid crystal projector cp-x940w/e
Table of Contents

Advertisement

Do not step on this unit or do not put a
heavy object on it.
• Do not step on this unit. Especially
pay attention if children are
present. If you do, the unit may fall over or
may be broken causing an injury.
• Do not put a heavy object on this unit. If you
do, the unit may fall due to its imbalance or it
may drop, causing an injury.
Do not block the ventilation holes.
Do not block the ventilation holes. If
the ventilation holes are blocked, the
heat inside may build up and it may
cause a fire. Do not use this unit in
the following ways: On its side. In a poorly
ventilated, narrow place. On a carpet or
bedspread. Covered with a tablecloth. Place this
unit so that the ventilation holes are kept 30cm
or more away from the wall.
Cleaning
Be sure to pull out the power plug
from the power outlet for safety
when cleaning.
Set the caster stoppers.
When this unit is installed on the
table with casters, set the caster
stoppers. If the table moves, it may
fall over, causing an injury.
6
Caution
Do not place this unit in a moist or dusty place.
• Do not place this unit in a moist or dusty place.
It may cause a fire, electric shock, etc.
• Do not place this unit where it would
be exposed to soot or steam, near a
cooking stove or humidifier, etc. It
may cause a fire, electric shock, etc.
Handle the power cord carefully.
• Do not bring the power cord near a heating
device. The shield of the cord may
melt and it may cause a fire, electric
shock, etc.
• Do not insert / disconnect the power
plug with wet hands. It may
cause an electric shock.
• When the power plug is to be
disconnected, do not pull the
power cord. The power cord may be damaged and
it may cause a fire, electric shock, etc. Be sure to
hold the power plug.
Caution when carrying it.
When this unit is to be moved, apply a
Pull out the power
cover to the lens and be sure to
plug from the
power outlet.
disconnect the power plug from the
power outlet and check that all
external connection cords are removed
before moving it. If not, the cord
may be damaged and it may cause
a fire, electric shock, etc.
Pull out the
power plug
from the power
outlet.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-x940wCp-x940e

Table of Contents