Liquid Crystal Projector CPX990W USER'S MANUAL Please read this user's manual thoroughly to ensure correct usage through understanding. BEDIENUNGSANLEITUNG Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung aufmerksam. MANUEL D'UTILISATION Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.
Liquid Crystal Projector USER'S MANUAL USER'S MANUAL WARNING • Please read the accompanying manual “SAFETY INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. NOTE TRADEMARK ACKNOWLEDGMENT : CONTENTS...
FEATURES FEATURES Outstanding Brightness Partial Magnification Function Distortion Correction Function BEFORE USE BEFORE USE Contents of package • NOTE Power Cord Power Cord Power Cord (UK Type) (Europe Type) (US Type) Projector Liquid Crystal Projector CP-X990W USER'S MANUAL Please read this user's manual thoroughly to ensure correct usage through understanding. BEDIENUNGSANLEITUNG Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung aufmerksam.
Part Names (continued) BLANK Button STANDBY/ON Button LASER Button VIDEO Button RGB Button Disk Pad MOUSE / RIGHT Button Used to operate the Used to click the right mouse shift function and mouse button. left click function. KEYSTONE Button AUTO Button RESET Button MENU Button Used to click the right...
Loading the Batteries CAUTION • Use only the specified batteries with this remote control transmitter. Also, do not mix new and old batteries. This could cause in battery cracking or leakage, which could result in fire or personal injury. • When loading the batteries, make sure the plus and minus terminals are correctly oriented as indicated in the remote control transmitter.
Cabling Table 2. Cabling Function Terminal Cable RGB IN 1 Accessory or optional RGB cable with D- Analog RGB input RGB IN 2 sub 15-pin shrink jack and inch thread screws Analog RGB output RGB OUT Digital RGB input Optional DVI cable with inch thread screws AUDIO IN [RGB 1] / [DVI] (interlocked with RGB IN 1 or DVI) Audio input...
Power Connection CAUTION • Be carful in handling the power Power outlet cord according to instructions of the accompanying manual "SAFETY INSTRUCTIONS" and this manual. • Connect the power cord firmly. Avoid using a AC Inlet loose, unsound outlet or contact failure. Power Cord Example of system setup Computer...
OPERATIONS OPERATIONS STANDBY/ BLANK STANDBY/ON LASER ON Button POWER Indicator STANDBY/ON Button VIDEO ZOOM button FOCUS button AUTO MENU KEYSTONE MENU SELECT RESET POSITION Power Switch FREEZE PinP MAGNIFY MUTE FOCUS button FOCUS ZOOM VOLUME Lens cap ZOOM button Power ON Power OFF WARNING •...
Basic Operation Table 3 . Basic Operation Item Description Select Input Signal ( : Press the INPUT button. RGB IN 1 → RGB IN 2 → DVI → VIDEO → S-VIDEO → COMPONENT VIDEO (→ RGB IN 1) Select RGB Input : Press the RGB button. VIDEO/S-VIDEO/COMPONENT VIDEO →...
Page 12
Table 3. Basic Operation (continued) Item Description VOLUME Volume Adjustment : Press the VOLUME button. Set/Clear Mute Mode : Press the MUTE button. No sound is heard in the MUTE MUTE mode. Automatic Adjustment at RGB Input : Press the AUTO button. Horizontal position(H.POSIT), vertical position (V.POSIT),clock phase (H.PHASE), and horizontal size(H.SIZE) are automatically adjusted.
Setup Menu SETUP INPUT IMAGE OPT. SETUP INPUT IMAGE OPT. BRIGHT BRIGHT CONTRAST CONTRAST SHARPNESS V POSIT H POSIT COLOR H PHASE TINT H PHASE H SIZE COLOR BAL R COLOR BAL R COLOR BAL B COLOR BAL B ASPECT ASPECT RGB IN 1 VIDEO...
Input Menu SETUP INPUT IMAGE OPT. EXECUTE AUTO CANCEL VIDEO VIDEO NR Progressive BLACK HDTV Table 5. Input Menu Item Description Automatic Adjustment at RGB Input: Select the EXECUTE with the button. Horizontal position (H.POSIT), vertical position (V.POSIT), clock phase (H.PHASE), and horizontal size (H.SIZE) are automatically adjusted.
Image Menu SETUP INPUT IMAGE OPT. BLANK MyScreen START UP ORIGINAL MyScreen MIRROR P.IN P. POSIT P.IN P. INPUT GAMMA Table 6. Image Menu Item Description Select Blank Screen: Select the screen in case of the BLANK mode with the button.The selected one (MyScreen, ORIGIAL or one colors) is displayed when the BLANK mode is ON.
Options Menu SETUP INPUT IMAGE OPT. VOLUME MENU COLOR LANGUAGE AUTO OFF SYNC ON G WHISPER Table 7. Options Menu Item Description ↔ VOLUME Volume Adjustment: Reduce VOLUME Increase VOLUME MENU COLOR Select Menu Background Color: Select with the buttons. Operation Start/Stop: Press the button.
No Signal Menu VOLUME BLANK START UP MIRROR MENU COLOR LANGUAGE AUTO OFF SYNC ON G WHISPER Table 8. No Signal Menu Item Description ↔ Increase VOLUME Volume Adjustment: Reduce VOLUME • When this function is used, audio input is automatically switched to video. The VOLUME audio input can be switched by moving the DISK PAD left and right during the display of the volume adjustment bar.
MAINTENANCE MAINTENANCE Lamp HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING • For disposal of used lamp, treat according to the instruction of community authorities. • Since the lamp is made of glass, do not apply shock to it and do not scratch it. •...
Page 19
Replacing the Lamp CAUTION • Ensure that screws are tightened properly. Screws not tightened fully may result in injury or accidents. • Do not use the projector with the lamp cover removed. Resetting the Lamp Timer → • NOTE ENGLISH-18 ENGLISH-18...
Air Filters filter cover Cleaning Air Filters filters Replacing the Air Filter CAUTION • Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate “SAFETY INSTRUCTIONS” thoroughly to ensure that maintenance is performed correctly. •...
TROUBLESHOOTING TROUBLESHOOTING OSD Message Table 9. OSD Messages Message Contents The usage time of lamp will be reaching 2000 hr CHANGE THE LAMP shortly. AFTER REPLACING LAMP, RESET THE LAMP TIME. It is recommended to replace the lamp soon. Prepare a new lamp as a replacement.
Indicators Message Table 10. Indicators Message POWER LAMP TEMP Contents indicator indicator indicator Lights Turns off Turns off The Standby mode has been set. orange Blinks Turns off Turns off Warming up. Please wait. green Lights Turns off Turns off ON. Normal operation possible. green Blinks Turns off Turns off Cooling.
Symptom Table 11. Symptom Symptom Possible cause Remedy Page The main power switch is not Turn on the main power switch. turned on. The power is not turned on. The power cord is Plug the power cord into an AC disconnected.
TECHNICAL TECHNICAL Dimension Diagram 308.5 Unit : mm 30.5 Signal Connector Pin Assignment 1. D-sub 15-pin Shrink Connector (RGB IN 1/RGB IN 2/RGB OUT) Pin No Signal Pin No Signal Pin No Signal Video input Red RGB IN 1: SCL(DDC) Video input Green Ground RGB IN 2: -...
Example of computer signal Resolution Display fH (kHz) fV (Hz) Rating Signal mode H × × V mode 720 × 400 37.9 85.0 VESA TEXT Zoom in 640 × 480 31.5 59.9 VESA VGA (60Hz) Zoom in 640 × 480 35.0 66.7 Mac13"mode...
Page 28
Initial set signals Back porch b Front porch d Back porch b Front porch d Display interval c Display interval c Sync a Sync a Computer / Horizontal signal timing (µs) Computer / Vertical signal timimg (lines) Signal Signal TEXT 20.3 TEXT VGA (60Hz)
Page 29
Connection to the Mouse Control 1. PS/2, ADB or Serial Mouse 2. USB Mouse NOTE PS/2 Mouse Projector Computer DATA Mouse jack CONTROL Terminal DATA Mini DIN 6-pin D-sub 15-pin shrink jack SEL0 TECHNICAL - 4...
Page 30
ADB Mouse Projector Computer ( POWER ON ) CONTROL Terminal DATA Mouse jack D-sub 15-pin shrink jack Mini DIN 4-pin Serial Mouse Projector Computer CONTROL Terminal Mouse jack D-sub 15-pin shrink jack D-sub 9-pin SEL0 USB Mouse USB jack (B type) Projector Computer USB jack...
Page 31
RS-232C communication Projector Computer RS-232C jack D-sub 9-pin Control jack D-sub 15-pin shrink jack SELO Communications setting 19200bps, 8N1 1 Protocol 2 Header 3 Command data Command data chart byte_0 byte_1 byte_2 byte_3 byte_4 byte_5 Action Type Setting code high high high Action (byte_0 - 1)
Page 32
Requesting projector status (Get command) Changing the projector settings (Set command) Using the projector default settings (Reset Command) Increasing the projector setting value (Increment command) Decreasing the projector setting value (Decrement command) When a command sent by the projector cannot be understood by the computer When data sent by the projector cannot be practice •...
Command data chart Command data Names Operation type Header Action Type Setting code BE EF 06 00 3B D3 01 00 00 30 00 00 Orange BE EF 06 00 AB D2 01 00 00 30 01 00 Green BE EF 06 00 5B D2 01 00...
Page 34
Command data chart Command data Names Operation type Header Action Type Setting code BE EF 06 00 7C D2 02 00 07 30 00 00 Magnify Increment BE EF 06 00 1A D2 04 00 07 30 00 00 Decrement BE EF 06 00 CB D3...
Page 35
Command data chart Command data Names Operation type Header Action Type Setting code Normal BE EF 06 00 46 D3 01 00 02 20 00 00 Mute Mute BE EF 06 00 D6 D2 01 00 02 20 01 00 BE EF 06 00 75 D3...
Page 36
Command data chart Command data Names Operation type Header Action Type Setting code BE EF 06 00 F1 72 02 00 01 22 00 00 Sharpness Increment BE EF 06 00 97 72 04 00 01 22 00 00 Decrement BE EF 06 00 46 73...
Page 37
Command data chart Command data Names Operation type Header Action Type Setting code Upper left BE EF 06 00 02 23 01 00 01 23 00 00 Upper right BE EF 06 00 92 22 01 00 01 23 01 00 bottom left BE EF 06 00...
Page 38
REGULATORY NOTICES REGULATORY NOTICES FCC Statement Warning WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 40
Fax: +46 (0) 8 562 711 13 Tel: +39 02 38073415 Servizio Clienti Email: csgswe@hitachi-eu.com Fax: +39 02 48786381/2 Email: customerservice.italy@hitachi-eu.com HITACHI EUROPE S.A.S HITACHI EUROPE LTD (Norway) AB Lyon Office STRANDVEIEN 18 B.P. 45, 69671 BRON CEDEX 1366 Lysaker FRANCE...