Hitachi CP-X940W/E Operating Manual page 17

Adjustments and functions (continued)
The menu SET UP serves for the change of parameters influencing the picture and for
SET UP
the move picture position.
RGB signal input
S E T U P I N P U T I M A G E O P T .
VOLUME
BRIGHT
CONTRAST
V POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL
Adjustment Item
VOLUME
BRIGHT
(BRIGHTNESS)
CONTRAST
SHARPNESS
COLOR
TINT
V.POSIT
(V.POSITION)
H.POSIT
(H.POSITION)
H.PHASE
H.SIZE
COLOR BAL
(COLOR BALANCE)
How to use the SET UP menu
1. Bar display items (VOLUME, BRIGHT etc.)
Move the green cursor to the item you wish to adjust, then move the MENU buttons on the unit, or the
DISK PAD, to left and right to adjust the length of the bar display. Some items can not be adjusted
during freeze or during magnify. (Please refer to the above table.)
2. Numerical display items (V POSIT, H POSIT etc.)
Use either manual operation or auto-adjustment. Some items can not be adjusted during freeze or
during magnify. (Please refer to the above table.)
< Manual Operation >
Adjust optional items manually.
(1) Use the MENU buttons on the unit or the DISK PAD on the remote
control to move the green cursor to the number of the item you wish to
adjust.
(2) With the green cursor on the number, use the MENU buttons on the
unit or the DISK PAD on the remote control to raise or lower the
value.
123 AUTO
111
31
1024
R B
Details of adjustment
Decrease
Dark
Lower
Soft
Less
Red
Moves the picture up or down. Or automatic control.
Moves the picture left or right. Or automatic control.
Decreases the picture flicker. Or automatic control.
Widens of Narrow the horizontal size of the picture. Or automatic control.
for Red
: operation is possible.
VIDEO signal input
SETUP INPUT IMAGE OPT.
VOLUME
BRIGHT
CONTRAST
SHARPNESS
COLOR
TINT
COLOR BAL
R B
Freeze
Increase
Bright
Higher
Sharp
More
Green
for Blue
: operation is not possible.
S E T U P I N P U T I M A G E O P T .
VOLUME
BRIGHT
CONTRAST
V POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL
Magnify Freeze &
Magnify
123
AUTO
111
31
1024
R B
17