Yamaha WaveRunner FX140 2002 Owner's/Operator's Manual page 32

1 Quick Shift Trim System (QSTS) selector
Use to select the trim angle of the watercraft.
2 QSTS shift lock lever
3 Start switch
Push to start the engine.
4 Engine shut-off switch
Remove the clip to stop the engine and dis-
able it from starting.
5 Clip
Insert into the engine shut-off switch to enable
starting of the engine.
Remove to stop the engine or prevent acci-
dental starting of the engine or unauthorized
use of the watercraft.
6 Adjustable rearview mirrors
7 Multifunction meter
Use to check watercraft operation.
8 Shift lever
Use to put the watercraft into forward or
reverse.
9 Throttle lever
Use to accelerate and decelerate.
0 Tilt lever
Use to adjust the tilt of the handlebars.
A Glove compartment
B Engine stop switch
Push to stop the engine normally.
C Engine shut-off cord (lanyard)
Attach to wrist so that the engine stops if the
operator falls off the watercraft.
2-3
E