Upnp And Ddns Settings - Vivotek VS3102 User Manual

UPnP and DDNS Settings

"Enable DDNS" This option turns on the DDNS function.
"Provider" The provider list contains four hosts that provide DDNS services. Please connect to the
service provider's website to make sure the service charges.
"Host name" If users wants to use DDNS service, this field must be filled. Please input the hostname that
is registered in the DDNS server.
"Username/E-mail" The Username or E-mail field is necessary for logging in the DDNS server or notify
users of the new IP address. Note: when this field is input as "Username" the following field must be
input as "Password".
"Password/Key" Please input the password or key to get the DDNS service.
"Enable UPnP" This turns on or off the UPnP function. When UPnP is turned off, the camera cannot be
found through "my network place" in MS Windows XP. If the UPnP network component is installed in
Windows XP, the hostname of the Video Server will be shown with bracketed IP address in "my network
place". Ex: the Video Server (at 192.168.0.96). That is: The hostname of the Video Server is "Video
Server", and the IP address of the Video Server is 192.168.0.96.
"Enable UPnP Port Forwarding" This turns on or off the UPnP port forwarding. When there is a router
45
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097