Table of Contents
Advertisement
If the attached motorized camera is not on the support driver list, choose the proper UART interface and
pull down the driver list to select Custom Camera type and click on
for further
configuration.
Setup the serial "Port Settings" according to the instruction manual of the custom camera. Then enter the
specific command related to PTZ in the respective field. The custom command for "Control Setting"
should be edited in ASCII format. The Video Server will interpret the ASCII format command to binary
string. For instance, "012000ABCD" will be sent out of the COM port as five hexadecimal bytes of 01,
20, 00, AB and CD. If the command string is composed of two or more commands, a comma ',' should be
inserted to separate each command. Each comma represents 200 milliseconds. For instance, a command
to pan left may be "01000305" and a command to stop panning may be "01000300". The user may edit
the applicable command as "01000305, 01000300" in the Move Left field. This means the camera will
pan left for 200 milliseconds. When everything is set, click on
to save the commands and click on
to close the command setting window.
54
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
Advertisement
Table of Contents
