Westerbeke BTD 8.0 KW 60Hz Operator's Manual page 21

SYSTEM SPECIFICATIONS
FUEL SYSTEM:
GENERAL
FUEL
FUEL INJECTION PUMP
FUEL INJECTION TIMING
NOZZLE
INJECTORS
FUEL PUMP
FUEL FIL TER( on engine)
AIR CLEANER
AIRFLOW
COOLING SYSTEM:
GENERAL
OPERATING TEMPERATURE
FRESH WATER PUMP
SEA WATER PUMP
SEAWWATERFLOW, AT 1800 RPM
(measured before discharging into
exhaust elbow.)
SYSTEM CAPACITY(Fresh Water)
LUBRICATION SYSTEM:
GENERAL
OIL FILTER
SUMP CAPACITY
OPERATING OIL PRESSURE (engine hot)
OIL GRADE
Open flow, totally self-bleeding
No.2 Diesel oil (cetane rating of 45 or higher)
Nippon Denso (Bosch M Type)
19° BIDC ±O.5 (static timing)
Throttle type
Pintle type
12-Volt DC; Electro-Magnetic type
Canister type, with replaceable element
Metal screen type-cleanable
48 cfm (1.36 cmm)
Closed fresh water-cooled block, thermostatically
controlled with heat exchanger.
170° - 190° F (77° - 88° C)
Centrifugal type, metal impeller, belt-driven
Positive displacement, rubber impeller, belt-driven
7.2 gpm (27.25 Ipm)
8 quarts (7.6 liters)
Pressure type by Trichoid pump, gear driven with
external pressure relief valve
Full flow, paper element, spin-on type
4.76 (4.5 liters)
40 - 80 psi (2.8 - 5.6 kg/cm 2 )
API specification CC or CD
19 WESTERBEKE GENERATORS