Moving Recorded Tracks; On The Recorder - Sony Walkman MZ-R900 Operating Instructions Manual

3
Press T MARK to erase the mark.
"MARK OFF" appears in the display.
The track mark is erased and the two
tracks are combined.
z
When you erase a track mark, the date, time,
and name assigned to the mark are also erased.
Notes
• You cannot erase a track mark that has been
written track marks recorded in different
recording mode (such as a track mark between
a track recorded in LP2 and a track recorded
in LP4). If you try to erase such a track mark,
"SORRY" appears in the display.
• You cannot erase a track mark that has been
written between a track recorded through a
digital connection and a track recorded
through an analog connection. If you try to
erase such a track mark, "SORRY" appears in
the display.

Moving recorded tracks

You can change the order of the recorded
tracks.
Example
Move track C from the third to the second
track.
A B
Before moving
A C
After moving
C D
B D

On the recorder

Jog lever (L)
1
While playing the track you want to
move, press the jog lever (L), flip the
lever until "EDIT" flashes in the
display, and then press the lever
again.
" : Name" flashes in the display
and the recorder plays the selected
track repeatedly.
2
Flip the jog lever (L) until
" : Move" flashes in the display,
and then press the lever.
For the example above, "MV003 t
003" appears in the display.
3
Flip the jog lever (L) to select the
destination track number.
For the example above, "MV003 t
002" appears in the display.
To cancel moving, press x.
4
Press the jog lever (L) again.
The track moves to the selected
destination track.
x
45