Reverb - Suzuki SP-67 Owner's Manual

SELECT CONTROLS
REVERB (REVERB LEVEL SETTING) - Reverb simulates the effect of playing in a big
room or hall where the sound reverberates off the walls and ceiling. The reverb
effect is engaged automatically when the power is turned on. You can switch the
reverb feature on and off or change the level of reverb from the Select controls
menu.
1. Press the SELECT button five times, the indicator on the display screen will be in the
REVERB position. The current reverb status followed by "Reverb" will appear on the
display screen.
2. Use the + button to turn the reverb effect on or the – button to turn the reverb effect
off.
SELECT
TRANSPOSE
TUNING
TOUCH
PERCUSS

REVERB

CHORUS
HARMONY
AFTER TOUCH
VOCAL
MODE
3. To change the reverb level, press the MODE button. The current reverb value fol-
lowed by "RevLevel", will appear on the display screen.
4. Use the + button to increase the level or the – button to decrease the level from 01 to
16. The number pad can also be used to directly enter a value ranged from 01 to 16.
Press the +, – buttons simultaneously to recover the default setting of 08.
5. After five seconds the display screen will recover to the default voice screen.
TRANSPOSE
TUNING
TOUCH
PERCUSS
REVERB
CHORUS
HARMONY
AFTER TOUCH
VOCAL
on : Reverb
1 01
OTS VOICE STYLE
A.VOL RHY BASS
08 : RevLevel
1 01
OTS VOICE
A.VOL RHY BASS
31 70
TEMPO
CHD1 CHD2 PAD
31 70
STYLE TEMPO
CHD1 CHD2 PAD
Indicates that
reverb is engaged.
REVERB
3D
1 1
REG PAGE
PHRS1 PHRS2
REVERB
3D
1 1
REG PAGE
PHRS1 PHRS2
39