Easy Set Up And Quick Play - Suzuki SP-67 Owner's Manual

Portable keyboard
Table of Contents

Advertisement

EASY SET UP AND QUICK PLAY

POWER SUPPLY - This piano can be powered by either an external AC power adapter or
by batteries.
Please note, to prevent possible damage due to battery leakage, remove the batteries from
the instrument if it is not to be used for an extended period of time. Battery leakage is not
covered under the Suzuki warranty.
USING THE AC POWER ADAPTOR: Plug the output cable of the sup-
DC 12VIN
+
-
USING BATTERIES: For battery operation this piano requires eight
1.
OPEN
2.
OPEN
3.
OPEN
THE MUSIC STAND - Insert the bottom edge of the music stand into
OFF
ON
STANDBY
TURN THE PIANO ON AND ADJUST THE VOLUME - Slide the
MIN
MAX
MASTER VOLUME
BEGIN TO PLAY!
plied power adaptor into the DC 12V IN jack on the back of the
unit. Then plug the input of the power adaptor into a convenient
AC power outlet. The internal batteries will be automatically
disconnected when the AC power adapter is used.
Please note, make sure that you only use the recommended
power adapter, if you are unsure of which adapter to use, please
check with your Suzuki dealer.
1.5V (R14), "C" cell batteries. When the batteries need to be
replaced the volume may be reduced, the sound may distort, or
other problems may occur. If this happens, turn the power off and
replace the batteries.
Please note, when batteries are used, the sound of the piano
may distort at high volume levels. This is because the power of
the amplifier is reduced as the batteries drop in voltage.
TO REPLACE THE BATTERIES
1. Open the battery compartment cover located on the instru-
ments bottom panel.
2. Insert eight new batteries, be careful of the polarity.
Please note, when the batteries run down, replace them with a
complete set of eight new batteries. Never mix old and new
batteries and do not use different kinds of batteries at the
same time.
3. Replace the compartment cover, making sure that it locks
firmly in place.
the slots located at the rear of the control panel.
POWER switch to the on position and adjust the MASTER VOL-
UME.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents