Tascam DP-006 Owner's Manual page 35

When a battery is being used, a battery icon shows the amount of power
remaining in bars ( , ,
When the batteries are almost dead and the power will soon turn off, an
icon with no bars appears blinking.
When using the AC adapter (sold separately)
Recorder transport state
5
One of the following icons appears depending on the status of the
recorder.
Indicator Meaning
Stopped
8
Playing back
t
Recording
0
Searching backward
m
Searching forward
,
Repeat playback mode indicator
6
When repeat playback is active
Level meter guide
7
This guideline for adjusting input and output levels indicates –12 dB.
Recorder time counter
8
Shows the elapsed time from the start of the song.
Cursor that shows time increment being edited
9
When the unit is stopped press the HOME button to move the cursor
between time counter divisions.
Turn the DATA wheel to change the value of the underlined time
increment.
Shows the F1 button function
0
When that Home Screen is open, press the F1 [TUNER] button to open the
TUNER screen.
).
appears.
appears.
3 – Names and functions of parts
INPUT A and B Level meters
q
These show this input source signal levels of INPUT A ( ) and INPUT B ( ).
TRACK 1-4 level meters
w
Shows the input level when recording and the playback signal level when
playing back.
Depending on the track type setting, the size of the level meter icons and
width of the level meters for TRACK 3 (
Track type Level meter icons
STEREO
MONO
e Level meter for stereo outputs (L, R)
Shows the output signal level from the /LINE OUT connector.
) and TRACK 4 (
) changes.
,
,
35
TASCAM DP-006