Table of Contents
Advertisement
• Make sure that the wireless receiver and wireless transmitter
are paired. The LED indicator on the transmitter is solid blue
when the devices are paired. See "There is some
interference. What do I do?" on page 47 if you need to
re-pair the devices.
• Turn off the wireless receiver and wireless transmitter, then
turn them back on.
• Press the reset button on the wireless receiver. See "How do I
reset the wireless receiver?" on page 48.
Why isn't my microphone working?
• Press the PWR button on the wireless receiver to turn the
receiver on. The headset has a sleep/standby mode feature
to preserve battery life. The headset goes into sleep mode if
there's no input for 3 minutes.
• Twist the tip of the microphone so the sound holes face your
mouth.
• Position the microphone several inches away from your
mouth so it does not overload when you speak. Try to
balance the microphone position and the volume setting for
optimum voice level.
• Press the all mute button (the Rocketfish logo) on the left
side of the headset once to make sure that the all mute
function is not activated. The LED on the wireless receiver
will light red when all mute is activated.
• Make sure that the volume on the wireless receiver is not
turned down or muted. The LED on the wireless receiver will
light orange when mute is activated.
• Rotate the CHAT VOLUME dial on the wireless receiver to
control the chat volume.
• Make sure the USB cable is connected to both the wireless
transmitter and your device.
50
Advertisement
Table of Contents
