RocketFish RE-GUV1202 User Manual page 41

7 Click to check Speaker and Wave, then click OK.
8 Slide the Speaker and Wave sliders to the maximum settings.
These settings determine the volume of the chat you hear. You
can use the chat volume control on the wireless receiver to
adjust the chat volume.
9 Click the X in the upper right corner of the dialog box to close
the box.
10Under Sound recording, make sure the Rocketfish Headset is
selected as the default device.
11Click Volume, then slide the Mic Volume slider to the middle
setting. This setting determines the volume of your voice that
others hear when you speak into the microphone.
12Click the X in the upper right corner of the dialog box to close
the box.
13Click OK to close the Sounds and Audio Devices Properties
window.
14If you do not want the headset to be the default device for
Window sounds, go back to the Sounds and Audio Devices dialog
box and set the default audio devices for playback and recording
back to their original settings.
15Close the open dialog boxes.
16Press the POWER button on the wireless transmitter, then press
the POWER button on the wireless receiver. When the
transmitter is connected to the receiver, the LED indicator on the
transmitter lights solid blue. You are done and your headset is
ready to use.
Computer
41