Display Latch - Dell Latitude D505 Service Manual

Display Latch

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed
batteries.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an
unpainted metal surface on the computer.
1. Remove the keyboard.
2. Remove the display
3. Remove the display
4. Remove the M2 x 5-mm screw that secures the display bracket to the top cover.
5. Lift the display bracket out of the top cover, and then remove the display latch.
NOTE: Ensure that the display bracket is upright when you replace the display latch.
1 top cover
2 M2 x 5-mm screw (1) 1428U
3 display bracket
4 display latch
Back to Contents Page
assembly.
bezel.
H1375
F1484