System Board; Removing The System Board - Dell Latitude X1 Service Manual

Back to Contents Page
System Board
Dell™ Latitude™ X1 Service Manual

Removing the System Board

CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the computer. The replacement kit for the
system board includes a CD that provides a utility for transferring the Service Tag to the replacement system board.
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
1. Follow the instructions in "Preparing to Work Inside the
2. Remove the keyboard.
3. Remove the display assembly.
4. Remove the memory module.
5. Remove the hard drive.
6. Remove the thermal-cooling
7. Remove the palm rest.
8. Remove the Mini PCI card.
9. Remove the modem.
10. Disconnect the speaker from the system board.
11. Disconnect the internal card with Bluetooth wireless technology
12. Disconnect the power button cable from the system board.
Computer."
assembly.
from the system board.